Candy… flowers… cards… are all perfectly fine Valentine’s gift but not particularly original. We here at Cheap but Chic have you covered with some researching of arts and crafts that will impress your loved one.
Valentine’s Card with Heart Chain Pop-Up
According to auntannie.com, here is what you will need to craft this item:
White computer paper or cardstock Optional: Colored pencils or markers, rubber stamps
Scissors and stamp pads, craft knife, ruler and cutting mat.
To make this item you will need to:
Step 1: Choose the card you want to make, and download the pattern. Each card pattern has two pieces: the left piece is the outside of the card, and the right piece is the heart chain pop-up. For a sturdier card, print the card pattern on cardstock and the optional “insides” pattern on paper. You can also make the card from paper by printing both the card pattern and the matching “insides” pattern on paper.
Step 2: Optional color. If you printed either of the plain patterns, use colored pencils, markers, or rubber stamps to decorate the card, card “insides,” and heart chain pop-up.
Tip: You may want to write a message on the inside of the card now.
Step 3: Cut out each pattern piece on the solid black line. If you are making your card from paper, cut the “insides” card piece on the outer black outline. For cardstock, cut on the inner black outline. Try to make your cuts very straight. The card will look better and fit together more easily with straight edges.
Tip: The card “insides” piece is optional when making the card from cardstock, but it does add a finished look to your card.
Tip: It is easier to make straight cuts with a craft knife and ruler. Kids, be sure to get adult help when using a craft knife!
Step 4: Fold the card outside and inside pieces in half on the center line. Fold the outside piece so that the marks are on the outside. For the inside piece, the marks are inside the fold. If you are using cardstock, score the fold lines first.
Step 5: If you are using the card “insides,” glue it inside the outside piece. Put glue on one half of the inside piece. Slide the two card parts together. That is, put the folded inside piece inside of the cards outside piece. Press. Turn the card over, and put glue on the other half of the inside piece. Press again.
Tip: When making the card from paper, the outside and inside pieces are the same size. It is important to align the pieces exactly.
Step 6: The pop-up is a chain of hearts. The pop-up must be folded before cutting. You will fold the pop-up like an accordion. First, fold the pop-up piece in half on the center line. The marked side is on the inside. This is called a valley fold. Second, fold back each of the ends on the lines. These folds are called mountain folds.
Tip: When making the card from paper, the pop-up can be made heavier by gluing the pop-up strips from the cards inside and outside patterns back-to-back. Do this before folding the pop-up.
Step 7: Hold the folded stack of hearts together and cut carefully around the heart shape. Do not cut the folds where they join the hearts together. Unfold the pop-up and you have a chain of hearts.
Step 8: Fold the heart chain the opposite way—Valley, mountain, valley. The colored sides of the hearts are all on the inside. Leave the hearts in this folded stack for gluing.
Open the card flat with the inside of the card up. Put glue on the back of the last heart in the stack. Glue it about ½” from the right edge of the card. Be sure that the mountain fold is on the right.
Next, put glue on the back of the heart on the top of the stack. Fold the left side of the card over on top of the hearts and press.
The materials you will need to craft according to rustandsunshine.com are:
Empty toilet paper roll
Handful of blank card
Here are the directions to make this craft:
Step 1: Flatten the cardboard tube so it has a crease on two sides.
Step 2: Push one crease inward to make a heart, and wrap a piece of tape around the tube to help the heart hold its shape.
Step 3: Pour a little red paint on a plate and dip one end in the paint.
Step 4: Put the end of the toilet roll with the paint on the blank card and start stamping.
Baking Cup Flower Valentines
According to skiptomylou.org to craft this item you will need:
Green masking tape
Regular hole punch
Paper baking cups ( six for each flower)
Tootsie Pops or Dum Dum Suckers
Here is what you will do to craft this item:
Step 1: Fold four paper baking cups into half and lay two out flat.
Step 2: Punch a hole 1/4 inch from the edge on the four folded papers.
Step 3: Fold the other two papers in half and punch off the edge to make a hole in the center of the baking cup (like paper on left side), open back up.
Step 4: Place four folded papers onto sucker stick, overlapping 1/4 of the baking cup each time a paper is added. Then place two open papers.
Step 5: Lay out two pieces of green masking tape about 7 inches long, sticky side facing up. Place a piece of wire in the center of one piece.
Step 6: Put sticky sides together with wire sandwiched in the middle.
Step 7: Cut a leaf shape at each end with 1 inch trimmed in the middle.
Step 8: Twist leaves underneath paper baking cups.
Step 9: Fold the four center papers in 1/4 to make a pie shape for a different look.
Step 10: Arrange papers on sucker stick for another beautiful flower.
Step 11: Fold mini muffin cup papers either way for mini flowers.
Step 12: It is easy to write to and from on the masking tape leaves. In no time at all you can have a whole bouquet of valentines.
Heart Rice Krispie Pops
According to skiptomylou.org you will need:
3 tablespoons butter – White chocolate or almond bark
40 large marshmallows – Sprinkles
6 cups Rice Krispies (puffed rice cereal) – 9X13 pan heart shaped or a heart shaped cookie cutter.
To bake this article you will need to do:
Step 1: Spray the pan with cooking spray.
Step 2: Make the original Rice Krispie treat recipe (what you need is above for this)
Step 3: Wet or oil hands and press mixture into heart shaped pan. If using a cookie cutter, spread mixture in a 9X13 pan and then cut out shapes.
Step 4: Turn pan over and tap hearts out of pan, or tap out the krispie treat block.
Step 5: Insert a cookie stick into the heart at the bottom. Slightly re-shape heart if needed.
Step 6: Melt white chocolate or almond bark in a shallow dish. Dip top of heart in the melted chocolate. It can also be spooned on the heart and smoothed with the back of the spoon.
Step 7: Before chocolate hardens, sprinkle with decorations.
Step 8: Once coating is completely hard, cover with a clear plastic bag (I trimmed the length) and tie with a ribbon.
Chocolate covered strawberries
Ingredients you will need for this according to foodnetwork.com are:
6 ounces semisweet chocolate, chopped
3 ounces white chocolate, chopped
1 pound strawberries with stems (about 20), washed and dried very well
To make this you will need to:
Step 1: Put the semisweet and white chocolates into 2 separate heatproof medium bowls. Fill 2 medium saucepans with a couple inches of water and bring to a simmer over medium heat. Turn off the heat; set the bowls of chocolate over the water to melt. Stir until smooth. (Alternatively, melt the chocolates in a microwave at half power, for 1 minute, stir and then heat for another minute or until melted.)
Step 2: Once the chocolates are melted and smooth, remove from the heat. Line a sheet pan with parchment or waxed paper. Holding the strawberry by the stem, dip the fruit into the dark chocolate, lift and twist slightly, letting any excess chocolate fall back into the bowl. Set strawberries on the parchment paper. Repeat with the rest of the strawberries. Dip a fork in the white chocolate and drizzle the white chocolate over the dipped strawberries.
Step 3: Set the strawberries aside until the chocolate sets, about 30 minutes.
Even though Valentine’s day is weeks away you may want to plan ahead and get started.